The ILKA® Sanierlösung is used to remove fungi, algae, moss, green coatings and mold from masonry, roof tiles, facades and concrete slabs as well as from stones, plasters, wood and glass. The sanitizing solution has an immediate, visible and disinfecting effect - and all this in just one work step! A preventive after-treatment with ILKA-Sanierschutz to protect the surfaces from renewed rapid re-use is recommended.
Remove unsightly coatings and mold from your property with the remediation solution
Especially in old properties and locations with a high environmental impact, such as industrial sites, unsightly coatings usually form, making the facades and roofs unsightly. The ILKA®-Sanierlösung removes these quickly and brings back the original shine. Especially before selling a property, it is worthwhile to use it, as a visually appealing exterior and the impression of a rather young and fresh property should significantly increase the sales value. Of course, the agent is also suitable for ETICS. Test it - we are sure you will be convinced!
Always read labels and product information before use.
1 liter units are supplied in bottles, 10 - 30 liter units in canisters, 120 - 220 liter units in barrels and the 1000 liters in IBC.
Do not dilute ILKA remediation solution. Apply with a brush
or by spraying onto the infested surfaces. The
Product should be allowed to act for approx. 2-3 hours. Afterwards the
(killed) infestation is removed mechanically with a brush or high-pressure
with a brush or a high-pressure device. In case of heavy
infestation, or if there are still traces of soiling on the facade, repeat the process.
the process should be repeated.
Afterwards, when the surface is completely dry, the surface should be protected with ILKA-Sanierschutzsurface should be protected with ILKA-Sanierschutz against rapid subsequent contamination.
In contact with acid, develops toxic gases. Irritating to eyes
and skin. Keep out of the reach of children. Do not spray on plants,
Do not spray on plants, fabrics, raw metal and paints.
Wash off splashes immediately with plenty of water.
Do not use below +8°C.
Hazard class: Corrosive, dangerous for the environment
pH value: 11.4
Consumption: after infestation approx. 250 ml/m²
The containers must be stored dry, closed and cool. Shelf life
At least 12 months. The product is not frost resistant.
Disposal according to official regulations! More detailed information on disposal can be found in the current safety data sheet.
The usual rules for handling chemicals apply: wear protective goggles, acid-proof gloves and protective clothing. In case of contact with skin or eyes, rinse immediately affected areas with plenty of cold water. Wash surfaces that come into contact with food with clean water. Use biocides safely. Always read label and product information before use.