AREXAL® Roof and facade sealing slurry 21 kg

SKU: LWP1036
HAN: AX1036
Category: Building waterproofing
Manufacturers: PAN-TECH Vertriebsgesellschaft mbH

199,50 €

9,50 € per 1 kg

incl. 19% VAT , plus

Low stock level

pcs

The new roof and facade slurry is based on the standard AREXAL® crystalline sealing slurry, but is additionally mixed with glass fibers, which significantly increases the stability and resistance of the finished sealing slurry. In combination with the B component ( ), a sealing slurry is created that is also extremely flexible. Thanks to the new mixture, the mud is not gray but white and therefore reflects the sunlight on the roof much better.

Finally seal old flat roofs with the new AREXAL roof and facade slurry

You often have flat roofs on which several layers of bitumen sheeting have been applied for years and which are still leaking somewhere and where you can't really seal these areas. To seal a flat roof cleanly, proceed as follows:
Clean the bitumen roof, then simply coat all surfaces, connections, inlet plates or glass and metal parts with our AREXAL roof and facade slurry + elastic slurry. For this, the two products are mixed pure and then add approx. 10% water and the slurry is ready to use. Approx. 1 1/2 9 kg canisters of the B component are required for each 21 kg sack of roofing and facade sludge! For 100 m² of roof area, that is 5x B component for 3 sacks of slurry.

For concrete flat roofs we recommend the normal crystalline sealing slurry.

Manufacturer
Name : PAN-TECH Vertriebsgesellschaft mbH
Street : Lessingstraße 27
ZIP-Code, City : 06844 Sachsen-Anhalt Dessau-Roßlau
Email: kundenservice(at)pan-tech.eu
Web: https://pan-tech.eu